摘要： 正断层构造广泛发育于盆地内和造山带中,其对可容空间分配及沉积物分布具有明显的控制作用,从而影响了冲积扇形态。为进一步探究正断层构造对冲积扇沉积过程及其内部构型的控制作用,利用水槽实验对正断层构造发育背景下的冲积扇发育过程进行模拟再现。研究表明,携带大量沉积物的碎屑流优先在上盘近断层处泄载,后经牵引流的改造,形成沿断面垂向生长、尖端指向物源的三角形分水滩。水动力较强时碎屑流越过分水滩并在分水滩尾部发育越滩朵体,水动力较弱时碎屑流遇分水滩尖端分流后沿断面在分水滩两侧发育断面朵体。受控于断面及分水滩的阻挡,冲积扇表面不同位置的沉积物泄载过程差异较大,粒度差异明显,上盘扇体中分水滩沉积物偏粗,越滩朵体次之,断面朵体最细。冲积扇的发育过程依据分水滩砂体厚度和断距大小之间的差异,共分为3个阶段。断距大小还会影响冲积扇沉积构型,断距越大,上盘可容空间越大,分水滩发育时间越长,扇体内部砂体叠置样式越复杂。受控于正断层的冲积扇内部构型在垂直物源剖面上从近端至远端,分别发育纵向沙坝、分水滩及碎屑流朵体,在平行物源剖面上以复合水道主控、分水滩叠复体主控、多期朵体叠复体主控为主。

关键词: 水槽实验, 正断层, 冲积扇, 沉积过程, 沉积构型

Abstract: Normal fault structures are widely developed in basins and orogenic belts,which control the accommodation space and the distribution of sediments and thus affecting the morphology of alluvial fans. A flume tank experiment was carried to simulate and clarify the control of normal faults on the sedimentary process and internal architecture of alluvial fans.The results show that the large amount of sediments carried by debris flow tend to be unloaded near the hanging wall of faults and are subsequently reworked by traction current,which result in a triangular distributary gravel bar grows vertically on fault plane with the tip pointing to the source area. When the hydrodynamic force is strong,debris flow goes across distributary gravel bar and forms over-bar lobe at the tail of the distributary gravel bar. When the hydrodynamic force is weak,debris flow forms fault plane-dominated lobe along fault plane and is located on both sides of the distributary gravel bar. Under the control of normal faults and the barrier of distributary gravel bar,the unloading process of sediments varies greatly at different positions on the surface of alluvial fan. The particle size varies greatly among different facies,with coarsest grains developed on the fans of hanging wall,finer grained on over-bar lobe and finest sediments on fault plane-dominated lobe. The development process of alluvial fan can be divided into three stages,according to the sandbody thickness and fault throw of distributary gravel bar. The fault throw also affects the sedimentary architecture of alluvial fan,with larger the fault throw generating larger the accommodation space of hanging wall,longer development time of distributary gravel bar and more complex of the superposition pattern of the sand bodies inside the fan. The internal architecture of alluvial fan that is controlled by normal faults includes longitudinal sandbar,distributary gravel bar and debris flow lobe in the profile vertical perpendicular to the sediment source direction from the proximal to the distal end. Along sediment longitudinal section,composite channel,superimposed distributary gravel bar complex and superimposed bodies of multi-phased lobes are dominant facies.

Key words: flume tank experiment, normal faults, alluvial fan, sedimentary process, sedimentary architecture

中图分类号: 

• P531